GPR Sand Maker
Due to the increasing market demand for the scale, intensification, energy conservation, environment protection and high-quality machine-made sand, HENGJI, a Chinese professional sand maker manufacturer, further optimizes the structure and function of traditional vertical-shaft impact crushers and launches a new generation of sand-making and reshaping machine with high efficiency and low costs --- GPR Vertical-shaft Sand Maker.
Input Size: 0-50mm
Capacity: 100-580T/H
Material: Granite, quartz, basalt, pebble, limestone, dolomite, etc.
Working Principle
GPR Vertical-shaft Impact Crusher (also known as “Sand Maker”) has two feed modes – “feed at center” and “feed at center & sides”. As for the former mode “feed at center”, materials at the feed hopper firstly pass through the central hole into the high-speed spinning rotor. In the rotor, materials are fully accelerated and thrown outwards from the launching port to collide with a part of materials that freely fall after rebound. Next, materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. Finally, finished products are discharged from the bottom discharge opening. As for the latter mode “feed at center & sides”, firstly, materials at the feed hopper pass through the circular hole. Then, materials are divided into two parts by the distributing tray. One part of materials enter the high-speed rotating impeller while the other part of materials fall from all sides of the tray. Materials in the impeller would be accelerated rapidly and thrown outwards at a high speed to collide with materials falling from all sides of the tray. Next, all materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. Finally, finished products are discharged from the bottom discharge opening.
Product Parameters
| 型號Model |
制砂 Sanding making |
整形 Reshaping |
制砂 Sanding making |
整形 Reshaping |
主軸轉速(r/min) Spindle speed(r/min) |
功率(kw) Power (kw) |
產品粒度D50(mm) 軟、硬、極硬
Product size D50 (mm)
Soft, hard, extremely hard | ||
|
最大進料粒度(mm) Maximum feeding size (mm) |
通過量(t/h) Throughput (t/h) | ||||||||
| GPR7000 | 45 | 45 | 80-280 | 80-280 | 1200-1800 | 132×2 | 6.0 | 8.2 | 11.0 |
| GPR8000 | 45 | 45 | 188-380 | 188-380 | 1200-1800 | 160×2 | 6.5 | 8.4 | 11.5 |
| GPR8500 | 45 | 45 | 230-400 | 230-400 | 1200-1800 | 200×2 | 6.5 | 8.4 | 11.5 |
| GPR9000 | 45 | 45 | 275-450 | 275-450 | 1200-1500 | 250×2 | 7.5 | 9.5 | 12 |
| GPR9500 | 45 | 45 | 290-500 | 290-500 | 1300-1700 | 280×2 | 7.5 | 9.5 | 12 |
Note:
1.The bulk specific weight is calculated by 1.6t/m³. When the width of the feeding port is above 600mm, it is a large-scale machine while when the width ranges from 300 to 600mm, it is a medium-sized machine.
2.Product pictures and parameters about models, data, performances and specifications on this website are for reference only. There is a chance that HENGJI may make changes on above-mentioned information. For specific messages, please refer to the real objects and user manuals. Without special instructions, HENGJI keeps the right to explain all data involved in this website.
